Sierra Wireless DART 200 CDPD Modem manual Charts and Diagrams, On the unit

Appendix
C	Charts and Diagrams
	Figure C-1 shows the hole pattern for the mounting bracket. Use a 4-40
	machine screw, a 4-25 tapping screw, or a 0.125 DIA rivet to fasten the
	bracket. A flat washer is not required because the bracket is made of
	hardened steel, but a lock washer is required.

Figure C-1. Mounting bracket template

4"

+ +

1.8

+ +

.14"

Figure C-2 shows the modem connector pinout configuration. A straight cable is required between the DTE (computer or terminal) and the DCE (modem).

Figure C-2. Modem connector pinout

5	4	3	2	1
9	8	7		6

	1	- Carrier Detect (CD)
	2	- Received Data (RXD)
DB-9S	3 - Transmitted Data (TXD)
(on the unit)	4 - Data Terminal Ready (DTR)
	5	- Signal Ground (GND)
	6	- Data Set Ready (DSR)
	7	- Request To Send (RTS)
	8	- Clear To Send (CTS)
	9	- N/C

PN1197-00 Revision 1.0