Sierra Wireless DART 200 CDPD Modem manual Set Dart Slip Address, Nnn.nnn.nnn.nnn

DART 200 CDPD Modem User’s Guide F DART AT Command Set

Table F-6. Service Provider commands beginning with caret (^) (cont.)

^S Set DART SLIP Address

Sets the SLIP IP Address of the Modem. This internal address is a private address between the modem and the terminal connected to the serial port and is unknown to the network. This address is often referred to as being the gateway, router or server address by the TCP/IP stacks that support SLIP operation.

Since the SLIP address is known only to the terminal and the modem, the convention is to use 1.1.1.2 for this address.

NOTE:

A SLIP address is required to permit the DART to operate in SLIP mode.

Format:

AT^Sn	Where n = the IP address of the modem SLIP port. The format is
	nnn.nnn.nnn.nnn.
Result codes:
OK	Valid argument
ERROR	Invalid argument
NOT ENABLED	Modem is not in service provider mode

PN1197-00 Revision 1.0 F-29