Sierra Wireless DART 200 CDPD Modem manual S57 RO, S58 RO, S59 RO, S60 SM

DART 200 CDPD Modem User’s Guide E S-Registers

Table E-2. Register summary (cont.)

Register	Value	Default	Description
S57 (RO)	bitmapped	0	Network status
	0,1		∙	Registration state:
				0 = unregistered
				1 = registered
	2,3		∙	Connection state:
				0 = no connection
				4 = connection
				8 = incoming connection
				pending
				12 = outgoing connection
				pending
	4		∙	Auto Registration with
				connection (\R2); ATD
				command only
				0 = Disable Auto-Reg with
				connection
				16 = Enable Auto-Reg with
				connection
	5		∙ Auto Registration with Power
				(\R4):
				0 = Disable Auto-Reg with
				Power ON
				32 = Enable Auto Reg with
				Power ON
	6		∙	Auto SLIP Mode
				0 = inactive
				64 = active
	7		∙	RF in range:
				0 = out of range
S58 (RO)				128 = in range and synchronized
	bitmapped	185	PAD status
	0		∙ Auto transmit mode on; see \T
				command
	1		∙ Manual transmit mode on; see
				\M command
	2,3		∙ Flow control mode; see \Q
				command
	4,5		∙	Data forwarding character
				option; see \F command
	6		∙	Unused
	7		∙ PAD Operating Mode; see \O
S59 (RO)				command
	0..255	0	Reserved
S60 (SM)	bitmapped	1	Value		Function
	0			1	Loopback
	1			2	Reserved
	2			4	Force channel selection
	3			8	RRM logging enabled
	4			16	RRM disabled
	5			32	Receive frame logging

PN1197-00 Revision 1.0 E-7