Sierra Wireless DART 200 CDPD Modem manual Slip Setup Examples, Trumpet

Appendix
D	SLIP Setup Examples

Trumpet

?

NOTE:

These instructions assume that the DART SLIP setup described in Chapter 5 has been completed.

The Trumpet Winsock is a shareware Windows only package that is currently in widespread use. Support for it is available primarily through Internet E-mail and the USENET newsgroup at alt.winsock. Look for a file called winsock.zip and a set of basic applications (ftp, telnet, ping, etc.) in a file called winapps.zip at:

ftp.psychol.utas.edu.au:/pub/pc/trumpet/winsock.

Trumpet is frequently used to support the SLIP interface of CDPD modems including the DART. For the DART the installation and startup instructions follow. Refer to Chapter 5, DART Supported Protocols, for complete information on SLIP setup.

Installation and startup

The following discussion assumes that Trumpet is not yet installed on your PC.

To do a basic installation:

1.Create a directory called Trumpet on your C drive

2.Copy winsock.zip and winapps zip to the TRUMPET directory

3.Unzip the files using PKUNZIP

∙PKUNZIP WINSOCK.ZIP

∙PKUNZIP WINAPPS.ZIP

4.If desired create Icons for TCPMAN, PINGW and TELW

PN1197-00 Revision 1.0