DART 200 CDPD Modem User’s Guide
Tables
Table 1-1. Basic AT command set | 1-5 |
Table 1-2. Service Provider AT command set | 1-6 |
Table 2-1. S-Registers above 100 | 2-14 |
Table 2-2. Registration failure troubleshooting | 2-17 |
Table 3-1. Key types | 3-2 |
Table 5-1. Remote UDP setup | 5-11 |
Table 5-2. Host UDP setup | 5-13 |
Table 5-3. Remote TCP setup | 5-20 |
Table 5-4. Host TCP setup | 5-21 |
Table 6-1. Typical null modem pinout | 6-2 |
Table 8-1. Telemetry options for PAD Mode | 8-15 |
Table C-1. Pin functions | C-2 |
Table C-2. RS-232 signal interface | C-2 |
Table E-1. S-Register digits | E-2 |
Table E-2. Register summary | E-3 |
Table F-1. Commands beginning with letters | F-2 |
Table F-2. Commands beginning with ampersand (&) | F-9 |
Table F-3. Commands beginning with backslash (\) | F-13 |
Table F-4. Commands beginning with asterisk (*) | F-18 |
Table F-5. Enable/Disable Service Provider mode | F-24 |
Table F-6. Service Provider commands beginning with caret (^) | F-25 |
Table F-7 Service Provider commands beginning with dash (-) | F-29 |
