Sierra Wireless DART 200 CDPD Modem manual Service Provider AT command set

DART 200 CDPD Modem User’s Guide 1 Introduction

Table 1-1. Basic AT command set (cont.)

*C	Enable/Disable SLIP TCP Header Compression
*E	Enable Network Connection with PIN
*G	SLIP Multicast Address Selection
*K	TCP PAD Keep Alive
*L	Set Listen Port Number
*M	Set MAS IP Address for SLIP
*P	Ping Remote Host
*R	Automatic SLIP Restart
*S	Start SLIP (Serial Line IP) Mode
*T	Telnet Keep Alive
*U	Unblock Modem - Pin Access
Table 1-2. Service Provider AT command set
^A	Set the IP Address of modem
^C	Clear Blocked Status
^F	Force PIN Usage
^G	Set Multicast Group ID
^H	Set Service Provider ID
^I	Set Service Provider network ID
^L	Set the Local Service Area ID
^P	Enable/disable Supervisor Mode
^S	Set the Modem SLIP Address
-L	Set Channel Lock
-R	Software Reboot
-V	View Radio Resource Management Data
-Z	View Modem Credentials

Sierra Wireless, Inc. 1-6