Mounting the Camera, cont.
Camera should be installed into the base of the dome after knocking out the holes, knock out 3 holes for mounting on a ceiling or 1 hole for the wall mounting bracket:
Mounting the camera on a ceiling
1.Knock out the three holes on the base of the dome using a screwdriver and hammer.
2.Insert the white rubber plugs into the knockout holes on the inside of the base.
3.Attach the black rubber washers on the outside of the base.
Mounting the Camera, cont.
4.Attach the camera to the base of the dome using the brass screw on the outside of the dome’s base.
5.Plug the power and video cables into the camera.
6. Remove the lens cap. (Don’t touch the lens).
7.Attach the base of the dome to a ceiling by inserting three screws into the knockout holes on the inside of the base.
8.Point the pip on the camera’s antenna in the direction of the TV that you connected the receiver to (if you’re using the wireless feature).
9.Attach the clear dome cover to the base of the dome, using the 5 screws provided.
18 | 19 |