X10 Wireless Technology VK79A Advanced Onscreen Menu Options Automatic Picture Control

Advanced Onscreen Menu Options

Automatic Picture Control

Automatic Picture Control (APC) changes the geometry of the picture produced by the camera. These changes are slight and it can be hard to notice how the picture is different.

·H-GAIN:The Horizontal Gain setting adjusts the horizontal (left to right) line of the picture.

·V-GAIN:The Vertical Gain setting adjusts the vertical line of the picture.

Advanced Onscreen Menu Options

Lens Settings

These settings control how the lens in the Sentinel Camera behaves during normal use.

·Digital ZOOM: The camera uses digital zoom (10X) after reaching the maximum optical zoom level (22X). Digital zoom produces a slightly less clear picture than optical, and can be turned off.

·ZOOM Speed: Controls how quickly the camera zooms in.

·ZOOM Type: Choose WIDE or TELE.

·Focus Speed: Controls how quickly the camera focuses.

·Focus: Choose between Auto (automatic continuous) and Manual focus (the default setting). If using Manual Focus you can select a long focal length (INF, or infinite) to allow the camera to focus on objects any distance away, or a short focal length (NEAR) if you are using the camera only to view objects relatively close. In Manual mode the camera will set focus automatically after a zoom in or out. If you select Auto, you can use the automatic continuous setting until you zoom in or out, at which point the camera sets back to Manual.