BASIC CAMERA SETUP
Your Sentinel Camera is ready to go out of the box! Follow these steps for a quick setup of your new camera.
Unpack these items.
You should have: the camera and its power supply; the camera remote; the camera mounting bracket, a weather resistant dome, and the screws to install the bracket. A wireless video receiver, and it’s video cable and power supply (shown above but sold separately) is also required if you want to use the camera wirelessly.
Basic Camera Setup
First you’ll set up and test the camera before you install the camera into the dome. Make sure you read this entire manual first in case you want to change a setting on the base of the camera before installing it in the dome.
Connect the camera to power.
Plug the camera’s power supply into a standard wall outlet. Plug the other end into the camera. Remove the protective cover from the camera’s lens.
4 | 5 |