TRENDnet TVIP512P manual Recording

TV-IP512P ProView PoE Internet Camera

Recording

The Recording Setup menu is used to determine when and how digital video recordings are handled. Recordings can be saved to an SD memory card (requires the insertion of an SD card into the camera) or to a shared folder on a secure server. The recording can be scheduled or event based using motion detection as the trigger. One option allows resolution of recordings to be adjusted down to use less hard disk space. Recording can be stopped when the hard disk is full or choose the option to overwrite the disk to replace old recordings.

Enable recording

Tick this checkbox to enable the recording feature. There are two options available for recording, SD Card or Samba network drive.

Record to

Click a radio button to specify where the recording should be saved. The available options are SD Card or Samba network drive.

SD Card

This option specifies that the recording will be saved to the SD Card in the SD Slot on the side of the camera.

Samba network drive

This option specifies that the recording will be saved to a Samba drive on your network.

Samba Auth

Use the drop-down menu to specify whether a user name and password is required to access the Samba drive. If no user name or password is required to access the Samba drive, choose Anonymous from the drop-down menu. If a user name and password is required to access the Samba drive, choose the Account option from the drop-down menu and configure the parameters as described below:

ƒUser Name- Type the user name required to access the Samba drive.

ƒPassword- Type the password required to access the Samba drive.

ƒPassword Confirm- Type the password required to access the Samba drive for verification.

ƒServer- Type the name or IP address of the server your Samba drive is on.

ƒShared Folder- Enter the path that points to the shared server.

Recording Menu

Click the Test button to check that the TV-IP512P can connect to the Samba drive.

37