TRENDnet TVIP512P manual TV-IP512P ProView PoE Internet Camera Send to

TV-IP512P ProView PoE Internet Camera

Send to

Tick the E-mail Address checkbox to specify that the images will be sent to an e-mail address. Configure the parameters as described below:

ƒUser Name- Type the User Name or login name for your e-mail account.

ƒPassword- Type the password for your e-mail account.

ƒSMTP Mail Server- Type the SMTP server for your e-mail account.

ƒSender E-mail Address- Type the e-mail address that you want to appear as the “From:” e-mail address in the snapshot e-mail.

ƒRecipient E-mail Address- Enter the e-mail address that you want to send the snapshots to.

ƒPort- Enter the port number that will be used to send the snapshot e-mails.

ƒTest- Click this button to send a test e-mail from the TV-IP512P to the specified recipient e-mail address to verify that all the credentials have been configured correctly.

Tick the FTP Server checkbox to specify that the images will be sent to an FTP Server. Configure the parameters as described below:

ƒUser Name- Type the User Name of your FTP account.

ƒPassword- Type the password for your FTP account.

ƒHost Name- Type the Host Name of your FTP server.

ƒPath- Enter the file path to the location on the FTP server you want to send snapshots to.

ƒFilename Prefix- Enter the prefix you want to attach to your snapshot files.

ƒPort- Enter the port number used by your FTP server.

ƒPassive Mode- Tick this checkbox if your FTP server requires you to use passive mode.

Click the Ok button to save your changes, or click Cancel to discard any changes made.

39