TRENDnet TVIP512P manual Display Controls, Snapshot, recording and audio controls

Page 51

TV-IP512P ProView PoE Internet Camera

Display Controls

The primary display and IPView Pro 2.0 control icons are described in detail below. When there are more than one camera displays viewed, one of the displays can be selected for management or additional changes. Simply left click on any display to select it. Notice the border around the display is bright aqua blue, indicating the “selected” status. For example, to go to a single screen display for any one camera, select the camera and click on the single screen display.

Left click on any display to “select” that display for camera management. Right click to view camera management and display options.

Snapshot, recording and audio controls

The still photo camera icon is used to take a snapshot of the selected live video display. The video camera icon is used to begin video recording of the selected live video display. Snapshot and videos files are stored in a default folder on the administrator’s system, or in a folder designated by the administrator.

The audio controls are represented by a microphone icon to activate the internal mic or the auxiliary audio input (if present), and a speaker icon for the audio output (remote speakers, if present).

Notice that when these functions are activated, the color of the icon changes from white to yellow.

Audio and video controls - inactive

Audio and video controls - activated

51

Image 51
Contents Page Contents Technical Specifications Terminal Application TV-IP512P ProView PoE Internet Camera About This User’s GuideBefore You Start Packing ListSystem Requirements ComputerNetwork Default configuration settings Username Default SettingsIntroduction Features and BenefitsLED Indicators Front Panel ComponentsFront panel of TV-IP512P Rear Panel view of TV-IP512P Reset buttonEthernet Port Power Receptacle Rear Panel ComponentsAttach Camera to Stand Installing the CameraConnect Ethernet Cable Connect Power using AC Adapter and Power On CameraConnect Power using PoE Reset Camera SD Card SlotSD Card Slot SetupWizard Launching the SetupWizardSetupWizard- Install Your Camera SetupWizard- Select Your Camera SetupWizard- Authentication SetupWizard- Change Password SetupWizard- Select a Connection Option ƒ PPPoEƒ Fixed IP SetupWizard- Select a Connection Option- PPPoE SetupWizard- Select a Connection Option- Dhcp SetupWizard- Select a Connection Option- Fixed IP SetupWizard- Other Settings SetupWizard- Camera Restart SetupWizard- Setting Up The CameraSetupWizard- Complete Accessing the Camera Video Display Using the Camera Web ManagerLogin Web Manager and Live Video DisplayCamera video display in web manager Live Video Display User Interface Video Display ControlLive Video Display user interface Recording, Snapshot, Audio and Digital Output Controls Event IndicatorsSetupWizard menu in Configuration directory Camera Configuration SetupNetwork Settings LAN IP SettingsNetwork Setup menus Port Detail UPnPUPnP port forwarding PPPoEContrast Image SetupNight Mode Video and Audio SettingsReset to Default Advanced video and audio settings Camera EnvironmentAudio Setup Motion DetectionMotion detection menu drawn area in red Auto Daylight Saving Enable Daylight SavingTime and Date Time and date menu Time ZoneSynchronize with NTP Server Recording Scheduling Snapshot PreferencesTV-IP512P ProView PoE Internet Camera Send to Digital Output Digital OutputRS-485 support RS-485Device Management menu Admin Password SettingDevice Setting Add User AccountUser List Load From Local Hard Drive Back Up and Restore Camera SettingsRestore To Factory Defaults Reboot DeviceFirmware Upgrade menu Firmware UpgradeCamera Log Device InformationLog Device Information displayLaunching IPView Pro 2.0 for the first time IPView ProAdd a camera for monitoring TV-IP512P ProView PoE Internet Camera Below is a general description of the user interface IPView Pro 2.0 User InterfaceSnapshot, recording and audio controls Display ControlsLaunch IPCamPlayer to Camera configuration with IPView Pro Adding a CameraTo add a camera Click Delete Selected Camera Removing a CameraSchedule Recording with IPView Pro Create Schedule TemplatesClick Create Template to make a new schedule Setup Motion Detection and Digital Input with IPView Pro IPView Pro 2.0 Recording Options IPView Pro 2.0 Miscellaneous Options Playing Video Files on a Computer IPCamPlayer User Interface Load Saved Video FilesPlay Video Files Ffdshow Install ffdshowTV-IP512P ProView PoE Internet Camera TV-IP512P ProView PoE Internet Camera TV-IP512P ProView PoE Internet Camera TV-IP512P ProView PoE Internet Camera Http//ffdshow.en.softonic.com Camera General Technical SpecificationsLED Port Settings Terminal Application Connector Pin AssignmentRS485B Swivel stand Interface SchematicLimited Warranty TV-IP512P ProView PoE Internet Camera TV-IP512P ProView PoE Internet Camera