2
HARDWARE
INSTALLATION
Attaching the Metal Clip
Ceiling screw | Screw | Wall screw |
Screw |
| |
|
|
Wall screw
Ceiling screw
Base of the camera
To attach the metal clip, remove the two rubber pads under the base of the camera firstly. Place the metal clip onto the camera base, and align the two holes of metal clip with two screw holes on the base. Secure the metal clip to the base with two screws (provided). Then, you can:
1. | Install the camera to the ceiling using two ceiling screws ( ); |
| or, |
2. | Install the camera to the wall using two wall screws ( ). |
| 11 |