TRENDnet tv-ip400 manual Dhcp

Page 32

 

You can select this option and enter the IP

Fixed IP

address directly. The default settings are:

z IP Address – 192.168.0.20

 

z Subnet Mask – 255.255.255.0

 

z Default Gateway – 0.0.0.0

 

If your network uses the DHCP server,

Dynamic

select this option. According to this setting,

the camera will be assigned an IP address

Address

from the DHCP server automatically. Every

(DHCP)

time when the camera starts up, please

 

make sure that the DHCP server is set to

 

assign a static IP address to your camera.

 

If your application requires a direct

 

connection from an ADSL modem through

 

the camera’s RJ-45 LAN port, click this

PPPoE

option and enter the User ID and Password

 

into the respective boxes. (You should have

 

an ISP PPPoE account.) The camera will get

 

an IP address from the ISP as starting up.

zDNS IP Address: DNS (Domain Name System) server is an Internet service that translates domain names into IP addresses. Enter at least one DNS IP Address in this field.

zDynamic DNS: The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname in any of the domains, allowing your computer to be more easily accessed from various locations on the Internet.

zSecond HTTP Port: The default port for communication is via port 80, and you can change it according to your network configuration. Select Enable from the option and enter the desired port number in the following box.

31

Image 32
Contents Page Table of Contents Frequently Asked Questions About this Guide Introduction Features and Benefits Web ConfigurationSimple To Use Support Variety of PlatformsRemote Utility Broad Range of ApplicationsUnpacking the Package Networking Accessing the CameraSystem Requirement Power LED Physical DescriptionFront Panel Link LEDDC Power Connector Reset ButtonNetwork Cable Connector Rear PanelHardware Installation Attaching the Metal ClipConnecting the Ethernet cable Attaching the Power SupplySecurity Application Camera Applications Application Diagrams of the Camera Home ApplicationsSoho Applications Enterprise Applications Using the Camera Web Configuration UtilityWelcome Screen of the Configuration Utility System Administration System Administration J ManagementSystem Video NetworkPage User System Administration J Configuration OFF Video Page Network Dhcp User Access Control Your camera DateTime Upload ProtocolPage Sequence Number Mail Page System Administration J Tools FTP Server TestReset Mail TestFactory Reset Firmware Upgrade BackupPage System Administration J Help AboutViewing Video Uploading/E-mailing Video Adjusting the Viewing Angle Controlling the CameraStoring the Position Swinging the CameraInstallation Ipview SEPage Page Windows XP Page Getting Started IPView SE Control PanelMinimize How to Add a Camera Add CameraPage Page Page Pan/Tilt Control Buttons Camera Config How to Change Camera Assign IP of New CameraConnect/Disconnect the Image Connect the ImageClose Disconnect the Image How to Delete a Camera Liberate CameraExtra Information Extra InformationHow to Adjust the Property Setting System ConfigureProxy Server Camera Configure Camera SettingMotion Setting Page Update Firmware Manual Record Motion RecordSchedule Record Frequently Asked Questions AppendixInternet Camera Installation Ping Your IP Address Trouble Shooting Page Page Page Time Zone Table Page Xplug Control Installation Installation To Web ServerInstallation To Local PC Page Page Adjust Internet Camera Focus Specification VideoEMI Glossary of Terms NumbersPage Page Page Ieee ISP Page Page RJ-45 connector is used for Ethernet cable UDP UTP Limited Warranty Page
Related manuals
Manual 13 pages 29.21 Kb Manual 9 pages 59.27 Kb