TRENDnet tv-ip400 manual About this Guide

Page 4

ABOUT THIS GUIDE

This manual provides instructions and illustrations on how to use your Pan/Tilt Internet Camera, includes:

zChapter 1, Introduction, provides the general information on the camera.

zChapter 2, Hardware Installation, describes the hardware installation procedure for the camera.

zChapter 3, Security, explains the security feature of the camera.

zChapter 4, Application of the Camera, provides the illustrations of the camera’s applications.

zChapter 5, Using the Camera, guides you through the configuration using the web browser.

zChapter 6, IPView SE, helps you to install and use the software.

zChapter 7, Appendix.

Please note that the illustrations or setting values in this manual are FOR YOUR REFERENCE ONLY. The actual settings and values depend on your system and network. If you are not sure about the respective information, please ask your network administrator or MIS staff for help.

3

Image 4
Contents Page Table of Contents Frequently Asked Questions About this Guide Introduction Features and Benefits Web ConfigurationSimple To Use Support Variety of PlatformsRemote Utility Broad Range of ApplicationsUnpacking the Package System Requirement Accessing the CameraNetworking Power LED Physical DescriptionFront Panel Link LEDDC Power Connector Reset ButtonNetwork Cable Connector Rear PanelHardware Installation Attaching the Metal ClipConnecting the Ethernet cable Attaching the Power SupplySecurity Application Camera Applications Application Diagrams of the Camera Home ApplicationsSoho Applications Enterprise Applications Using the Camera Web Configuration UtilityWelcome Screen of the Configuration Utility System Administration System Administration J ManagementSystem Video NetworkPage User System Administration J Configuration OFF Video Page Network Dhcp User Access Control Your camera DateTime Upload ProtocolPage Sequence Number Mail Page System Administration J Tools FTP Server TestReset Mail TestFactory Reset Firmware Upgrade BackupPage System Administration J Help AboutViewing Video Uploading/E-mailing Video Adjusting the Viewing Angle Controlling the CameraStoring the Position Swinging the CameraInstallation Ipview SEPage Page Windows XP Page Getting Started IPView SE Control PanelMinimize How to Add a Camera Add CameraPage Page Page Pan/Tilt Control Buttons Camera Config How to Change Camera Assign IP of New CameraConnect/Disconnect the Image Connect the ImageClose Disconnect the Image How to Delete a Camera Liberate CameraExtra Information Extra InformationHow to Adjust the Property Setting System ConfigureProxy Server Camera Configure Camera SettingMotion Setting Page Update Firmware Schedule Record Motion RecordManual Record Frequently Asked Questions AppendixInternet Camera Installation Ping Your IP Address Trouble Shooting Page Page Page Time Zone Table Page Xplug Control Installation Installation To Web ServerInstallation To Local PC Page Page Adjust Internet Camera Focus Specification VideoEMI Glossary of Terms NumbersPage Page Page Ieee ISP Page Page RJ-45 connector is used for Ethernet cable UDP UTP Limited Warranty Page
Related manuals
Manual 13 pages 29.21 Kb Manual 9 pages 59.27 Kb