TRENDnet tv-ip400 manual Internet Camera Installation

Page 77

Q:What algorithm is used to compress the digital image?

A:The camera utilizes the JPEG image compression technology providing high quality images for users. JPEG is adopted since it is a standard for image compression and can be applied to various web browser and application software without the need to install extra software.

Internet Camera Installation

Q:Can the Internet Camera be used out-doors?

A:The camera is not weatherproof. It needs to be equipped with a weatherproof case to be used outdoors and it is not recommended.

Q:What network cabling is required for the camera?

A:The camera uses Category 5 UTP cable allowing 10 Base-T and 100 Base-T networking.

Q:Can the camera be setup as a PC-cam on the computer?

A:No, the camera is an Internet Camera used only on Ethernet and Fast Ethernet network.

Q:Can the camera be connected on the network if it consists of only private IP addresses?

A:The camera can be connected to LAN with private IP addresses.

Q:Can the camera be installed and work if a firewall exists on the network?

A:If a firewall exists on the network, port 80 is open for ordinary data communication. However, since the camera transmits image data, the default port 8481 is also required. Therefore, it is necessary to open port 8481 of the network for remote users to access the camera.

76

Image 77
Contents Page Table of Contents Frequently Asked Questions About this Guide Introduction Web Configuration Features and BenefitsSimple To Use Support Variety of PlatformsBroad Range of Applications Remote UtilityUnpacking the Package Networking Accessing the CameraSystem Requirement Physical Description Power LEDFront Panel Link LEDReset Button DC Power ConnectorNetwork Cable Connector Rear PanelAttaching the Metal Clip Hardware InstallationAttaching the Power Supply Connecting the Ethernet cableSecurity Application Camera Applications Home Applications Application Diagrams of the CameraSoho Applications Enterprise Applications Web Configuration Utility Using the CameraWelcome Screen of the Configuration Utility System Administration J Management System AdministrationSystem Network VideoPage User System Administration J Configuration OFF Video Page Network Dhcp User Access Control Your camera DateTime Protocol UploadPage Sequence Number Mail Page FTP Server Test System Administration J ToolsMail Test ResetFactory Reset Backup Firmware UpgradePage About System Administration J HelpViewing Video Uploading/E-mailing Video Controlling the Camera Adjusting the Viewing AngleSwinging the Camera Storing the PositionIpview SE InstallationPage Page Windows XP Page IPView SE Control Panel Getting StartedMinimize Add Camera How to Add a CameraPage Page Page Pan/Tilt Control Buttons Camera Config Assign IP of New Camera How to Change CameraConnect the Image Connect/Disconnect the ImageClose Disconnect the Image Liberate Camera How to Delete a CameraExtra Information Extra InformationSystem Configure How to Adjust the Property SettingProxy Server Camera Setting Camera ConfigureMotion Setting Page Update Firmware Manual Record Motion RecordSchedule Record Appendix Frequently Asked QuestionsInternet Camera Installation Ping Your IP Address Trouble Shooting Page Page Page Time Zone Table Page Installation To Web Server Xplug Control InstallationInstallation To Local PC Page Page Adjust Internet Camera Focus Video SpecificationEMI Numbers Glossary of TermsPage Page Page Ieee ISP Page Page RJ-45 connector is used for Ethernet cable UDP UTP Limited Warranty Page
Related manuals
Manual 13 pages 29.21 Kb Manual 9 pages 59.27 Kb