STACKING KIT INSTALLATION
This stacking kit includes:
•Two (2) side rails
•One (1) front rail
•Four (4) screws
Tools Needed for Installation:
•
To ensure safe and secure installation, please observe the following instructions.
wWARNING
•Incorrect installation can cause serious accidents.
•The weight of the dryer and the height of installation make this stacking procedure too risky for one person. Two or more people are required when installing the stacking kit. There is a risk of serious back injury or other injuries.
•Do not use the stacking kit with a gas dryer in potentially unstable conditions such as a mobile home. Failure to follow this warning can result in serious injury.
•Place the washer on a solid, stable, level floor capable of supporting the weight of both appliances. Failure to follow this warning can result in serious injury.
•If appliances are already installed, disconnect them from all power, water, or gas lines and from draining or venting connections. Failure to do so can result in electrical shock, fire, explosion, or death.
1Make sure the surface of the washer is clean and dry. Remove paper backing from the tape on one of the stacking kit side brackets.
2Fit the side bracket to the side of the washer top as shown in the above illustration. Firmly press the adhesive area of the bracket to the washer surface. Secure the side bracket to the washer with a screw on the back side of the bracket. Repeat steps 1 and 2 to attach the other side bracket.
6
