Emerson F-SERIES SENSOR Specifications, Definitions, European installations, Installation options

Before You Begin

Specifications

Full product specifications can be found in the F-Series Product Data Sheet, which is available from the Micro Motion web site at www.micromotion.com.

Definitions

The term MVD™ transmitter refers to the following transmitter models:

•Models 1500, 1700, 2500, and 2700

•Models 3500 and 3700

The term high-temperature sensor refers to the following F-Series models:

•F025A and F025B

•F050A and F050B

•F100A or F100B

The term extreme high-temperature sensor refer to the following F-Series models:

•F025C and F025E

•F050C and F050E

•F100C and F100E

European installations

This Micro Motion product complies with all applicable European directives when properly installed in accordance with the instructions in this manual. Refer to the EC declaration of conformity for directives that apply to this product.

The EC declaration of conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available on the internet at www.micromotion.com/atex or through your local Micro Motion support center.

Information affixed to equipment that complies with the Pressure Equipment Directive can be found on the internet at www.micromotion.com/library.

Installation options

The F-Series sensor makes up one part of a Coriolis flowmeter. The other part is a transmitter. F-Series sensors are available with the following electronics interfaces:

•An integral core processor for connecting to a 4-wire remotely mounted transmitter or to a user-supplied remote host (Figure 1).

•An integral Model 1700 or 2700 transmitter (Figure 2).

•A 9-wire junction box for connecting to a remotely mounted transmitter or a remotely mounted core processor (Figure 3).

•An integrally mounted IFT9701 transmitter (Figure 4).

•High-temperature and extreme high-temperature models are equipped with a flexible conduit, on which can be mounted a Model 1700/2700 transmitter, a core processor, or a junction box (Figure 5).

2 Sensor Installation: F-Series