The default setting for Admin is blank space (Null String), and you need to key in the Admin ID with a maximum length of 12 (Printable ASCII) characters and enter the Admin Password with a maximum length of 8 (Printable ASCII) characters.
It is highly recommended to set the Admin ID and Admin Password as soon as possible to enable security option for the Wireless Internet Camera to function.
IP Assignment:
Important Information
Access to the Wireless Internet Camera is done through assigning a proper IP address. Please make sure to use a vacant IP address when you assign the IP address for the Wireless Internet Camera. This will prevent errors from occurring if the IP address is overlapped.
There are two options to select from the IP Assignment: Manually Assign or Assign Automatically Using.
Manually Assign
You can click “Manually Assign” and directly enter the IP address.
The default settings are as follows:
•Default IP – 192.168.0.20
•Subnet Mask – 255.255.255.0
•Default Gateway – 0.0.0.0
Assign Automatically Using
If your network is using RARP, BOOTP or DHCP server, you can click “Assign Automatically Using” and then click “RARP”, “BOOTP” or “DHCP”. Under this setting the Wireless Internet Camera will automatically assign an IP address from RARP, BOOTP or DHCP server. Every time when the camera starts up, please make sure that the DHCP server is set to assign a static IP address to your camera.
If your application requires direct connection from an ADSL modem through the Wireless Internet Camera’s
DNS IP Address:
DNS (Domain Name System) server is an Internet service that translates domain names into IP addresses. Enter at least one DNS IP Address.
Dynamic DNS:
The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname in any of the domains, allowing your computer to be more easily accessed from various locations on the Internet.
30 | 31 |