TRENDnet TVIP252P manual

Page 25

Compression Buttons: Select to transmit and record the video using MPEG4 or MJPEG compression.

Function Buttons: Use these buttons to control the audio, video, and trigger functions.

Manual Record allows you to record and save a video clip.

Snapshot allows you to capture and save a still image.

Browse allows you to assign the destination folder to store the video clips and still images.

Talk allows you to speak out through the camera. Please note only one user is allowed to use this function at a time.

Listen allows you to receive the on-site sound and voice from the camera.

Trigger Out allows you to trigger on/off the GPIO output manually.

Live View Image: Displays the real-time image of the connected camera.

Zoom In Buttons: Click the buttons to zoom in the live view image by 1x, 2x, and 3x.

Camera Information: Displays the camera’s location and the current date & time. The information can be modified in the Web Configuration.

NOTE If your PC uses Microsoft Vista platform you may not be able to find these recorded files that are stored by Snapshot or Manual Record. If this is the case, you will need to disable the protected mode of Security in the IE Browser through the following steps:

1.Open the Internet Explorer browser.

-24 -

Image 25

Contents Page Preface Page Contents Specification Glossary of Terms Chapter Introduction to Your Amera Checking the Package ContentsGetting to Know Your Camera  Connectors Physical Components Connecting Cables  Link & Power switches  LED indicators Inside Components  Remote Control Supported Features and Benefits MPEG4/MJPEG Dual-codec Supported  Flexible Audio Capability Multiple Platforms Supported  I/O Connectors Supported Multiple Profiles Supported  Multiple Applications SupportedSystem Requirement Cameras within Your Network Applications of the Camera Basic Installation Surface Installing the CameraInstall the camera to the ceiling with three screws Page Page Using IPSetup Accessing the CameraPage Page Camera Display Area Click StartProgramsTRENDnetIPSetup, and then click IPSetupPage Accessing to the Camera  Live View/Setup Switch Page Click Tools Internet Options Click Security Configuring the IP Address of the PC Using the Web Configuration Chapter Configuring the CameraCamera Setting Using Smart WizardIP Setting Email Settings Confirm Settings  Basic System Basic Setup Basic Date & Time  Basic User  General User  Direct Video Stream Authentication Guest Network Settings  Network Network Page DNS  Ports Number  Network IP FilterPage Page  Video & Audio Camera Setting up Video & Audio Video & Audio Video  Image Setting MPEG4  Video & Audio Text Overlay  Video & Audio AudioPage  Event Server Setting FTP Event Server Configuration FTP  Email  Event Server Setting Email Event Server Setting Network Storage  Network Storage Motion Detect  Event Configuration General Setting Event Config Event Configuration Arrange Schedule Profile  Event Configuration Motion Detect Trigger  Event Configuration Schedule Trigger  Event Configuration Gpio Trigger Page Tools Page  Information Device Info Information Information System Log Logs table displays the events log recorded by the system Securview Software InstallationPage Page Page Page Using Installation  Controls Panel Item Features View Selection Panel  Camera Panel  Video View Window and Camera List Video Viewing  System PanelClick Add New Camera To add a cameraPage Page To remove a camera To link to the Web page of the camera  Manually record To Record Video Trigger recording by motion detection  Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Other AccountInformation Specification  Audio Input  User Interface LANOutput CodecGlossary of Terms Connector Pin AssignmentPage Numbers Bootp Enterprise HEX ISP Mjpeg 100 101 102 103 Limited Warranty 105 106 107 108