TRENDnet TVIP252P manual Dns

-Static IP: Select this option to assign the IP address for the camera directly. You can use IPSetup to obtain the related setting values.

IP	Enter the IP address of the camera. The
	default setting is 192.168.10.30.
Subnet	Enter the Subnet Mask of the camera.
Mask	The default setting is 255.255.255.0.
Default	Enter the Default Gateway of the camera.
Gateway	The default setting is 192.168.10.1.
Primary/	DNS (Domain Name System) translates
Secondary	domain names into IP addresses. Enter
DNS	the Primary DNS and Secondary DNS
	that are provided by ISP.

-PPPoE: Select this option when you use a direct connection via the ADSL modem. You should have a PPPoE account from your Internet service provider. Enter the User Name and Password. The camera will get an IP address from the ISP as starting up.

NOTE Once the camera receives an IP address from the ISP after starting up, it automatically sends a notification email to you. Therefore, when you select PPPoE as your connecting type, you have to set up the email or DDNS configuration in advance.

DDNS Setting: With the Dynamic DNS feature, you can assign a fixed host and domain name to a dynamic Internet IP address. To set up the DDNS:

1.Select the Enable option to enable this feature.

2.Select the Provider from the pull-down list.

3.Enter the required information in the Host Name, User Name, and Password boxes.

-38 -