TRENDnet TVIP252P manual  Network IP Filter,  Ports Number

Page 40

NOTE You have to sign up for DDNS service with the service provider before configuring this feature.

UPnP: The camera supports UPnP (Universal Plug and Play), which is a set of computer network protocols that enable the device-to-device interoperability. In addition, it supports port auto mapping function so that you can access the camera if it is behind an NAT router or firewall.

Select the Enable option to enable this feature.

Ports Number

-HTTP Port: The default HTTP port is 80.

-RTSP Port: Configure the transmission of streaming data within the network. The default RTSP (Real Time Streaming Protocol) port is 554.

NOTE If the camera is behind a NAT router or firewall, the suggested ports to be used are from 1024 to 65535.

Network >> IP Filter

- 39 -

Image 40

Contents Page Preface Page Contents Specification Glossary of Terms Checking the Package Contents Chapter Introduction to Your AmeraGetting to Know Your Camera  Connectors Physical Components Connecting Cables  Link & Power switches  LED indicators Inside Components Features and Benefits  Remote Control Supported MPEG4/MJPEG Dual-codec Supported  Flexible Audio Capability I/O Connectors Supported  Multiple Platforms Supported Multiple Profiles Supported  Multiple Applications SupportedSystem Requirement Applications of the Camera Cameras within Your NetworkInstalling the Camera  Basic Installation SurfaceInstall the camera to the ceiling with three screws Page Page Accessing the Camera Using IPSetupPage Page Click StartProgramsTRENDnetIPSetup, and then click IPSetup Camera Display AreaPage Accessing to the Camera  Live View/Setup Switch Page Click Tools Internet Options Click Security Configuring the IP Address of the PC Chapter Configuring the Camera Using the Web ConfigurationCamera Setting Using Smart WizardIP Setting Email Settings Confirm Settings Basic Setup  Basic System Basic Date & Time  Basic User  General User  Direct Video Stream Authentication Guest Network Settings  Network Network Page DNS  Network IP Filter  Ports NumberPage Page Setting up Video & Audio  Video & Audio Camera Image Setting  Video & Audio Video MPEG4  Video & Audio Audio  Video & Audio Text OverlayPage Event Server Configuration  Event Server Setting FTP FTP  Event Server Setting Email  Email Event Server Setting Network Storage  Network Storage Motion Detect Event Config  Event Configuration General Setting Event Configuration Arrange Schedule Profile  Event Configuration Motion Detect Trigger  Event Configuration Schedule Trigger  Event Configuration Gpio Trigger Page Tools Page  Information Device Info Information Information System Log Logs table displays the events log recorded by the system Installation Securview SoftwarePage Page Page Page Using Installation Item Features  Controls Panel View Selection Panel  Camera Panel  System Panel  Video View Window and Camera List Video ViewingTo add a camera Click Add New CameraPage Page To remove a camera To link to the Web page of the camera To Record Video  Manually record Trigger recording by motion detection  Schedule Recording Configuration Select a camera Add Schedule Page To configure the recording settings Page To playback the recorded video To set up motion detection options Page Account OtherInformation Specification  User Interface LAN  Audio InputOutput CodecConnector Pin Assignment Glossary of TermsPage Numbers Bootp Enterprise HEX ISP Mjpeg 100 101 102 103 Limited Warranty 105 106 107 108