Siemens CFMC1315-LP configurationmanual Connecting Camera and Personal Computer

Page 17

Installing the camera

For more information, read your computer's user's guide.

Connecting Camera and Personal Computer

1.Connect LAN cable and turn the power on.

Connect the LAN cable (straight cable) connected to the camera to the hub. Or, connect the camera to a personal computer with the power turned on using the LAN cable (cross cable). Connect AC 24V/DC 12V to the power terminal.

2.Set the IP address of the personal computer.

Set the IP address which you are not using other than 192.168.0.10 (camera's IP address).

Set the IP address to 192.168.0.20 (and subnet mask to 255.255.255.0) as an example.

For details on the procedure, refer to the user's guide of the personal computer.

3.Test the camera connection using ping.

Start a command prompt. Type "ping 192.168.0.10" and press "Enter" key.

If the "Reply from..." message appears, the connection is correctly established.

4.Search the camera by "IpFinder" explained and view a camera image.

Start "IpFinder" and click the "Search" button.

Confirm that the camera name "nwcam05" is displayed in the camera list.

Click "nwcam05" to select.

The camera name, IP address and HTTP port No. are displayed in the "Network Camera Lists" field.

Double-click the camera in the camera list you wish to log-in.

The screen for inputting the user name and password will appear. Input the administrator log-in ID and password. (See "Log-in Screen")

A camera image screen of the network camera will appear.

NOTE

zTo view images without using "IpFinder," launch the Internet browser, enter URL http://192.168.0.10/ in the address box and press "ENTER."

zIt takes about10 seconds to activate the camera.

zIf a port number other than "80" is set, designate the port number by suffixing it after ":" as in http://192.168.0.10:88

 

17

 

 

Siemens Building Technologies

 

Fire Safety & Security Products

01.2009

Image 17
Contents CFMC1315-LP Trademarks CopyrightContacting us Training coursesContents 10.1 Page Page General safety precautions SafetyInstallation Target readersMeaning of the hazard symbols Meaning of the signal wordsCleaning Damage due to unsuitable mounting locationEuropean Directive 2004/108/EC Electromagnetic Compatibility EU directivesImage System Description SpecificationsOrdering Data Package ContentsCamera part definition Camera part and connector definitionAlarm in terminal Alarm out terminalPower in connector 6 IP/TV switch Reset buttonPrecautions Installing the cameraPower adaptor SD Memory cardSpecifications Setting Network Camera EnvironmentSwitch Concept of the Network CameraIP Address Connecting the Camera and Personal Computer by NetworkConnection Configuration Connecting Camera and Personal Computer Click the Home page of selected device button Using the Camera Search Application IpFinderSetting up IpFinder Ssdp Simple Service Discovery Protocol / network protocol Using the Camera Search Application Web cam IP managerLog-in Screen Administrator Log-inViewing and Listening Preparations before displayingLog-in the camera Browser setting when proxy server is usedComponents of unit home Camera Image ScreenCompression ConfigurationImage mode Multicast Streaming Unicast StreamingHow to operate Rtsp Then fill in rtsp//IP addressrtspport/livestream Network Settings in the Configuration menu Network SettingsBasic Settings FTP Server Ddns SettingsImage Colour Camera Basic settingsImage Parameters Picture Camera-mask zone settings Camera-Cropping settings Camera-OSD settings External digital input AlarmMotion detection settings Audio Event Alarm outputFTP recording conditions RecordFTP recording FTP Server Settings Server 1 SD Card Back Up if FTP Fail Connecting methodSD recording Configuration Emailing recording Authentication settingCondition settings for sending e-mail by motion Condition settings for sending e-mail by scheduleCondition settings for sending e-mail by alarm Mail to Address List NAS recording Configuration Audio output AudioAudio input Date/Time Access protection Administrator Functions AdministratorPassword User listForbidden Ports FirewallIP Adress Filter Forbidden Protocol SettingSystem Configuration UpdateTemperature Information 11 LogEvent Log Audio record setup NAS player setupUtility program application Playing back NAS filePerform firmware update in the following sequence Firmware update setupDisposal MaintenanceJpeg Keyword indexKeyword index Page A6V10236128