Lumens Technology DC170 Descriptions of major functions, Would like to switch image sources

Page 25

Chapter 7 Descriptions of major functions

7.1I would like to automatically adjust the image to have the best brightness and focusing performance

Use the remote control or control panel:

1.Press [AUTO TUNE] for the optimal brightness and focal length.

7.2I would like to switch image sources

Live image is the default image source. Press [SOURCE] on the remote control or control panel to have DC170 switch among the following images sources:

1.Live images (default).

2.Computer.

<Remark> This image switch applies to VGA OUT only.

7.3I would like to switch the image mode

Use the remote control or control panel:

1Press [MENU] to enter the setting menu.

2Press [], [], [], or [] to select [Image mode].

3Press [] or [] to the [Normal/Film/Slide/Microscope].

4Press [MENU] to exit.

7.4I would like to make text clearer and photos more colorful

7.4.1 Photo/Text mode descriptions

The default [Photo/Text] mode is in Photo (Photo mode). To change this setting, please use the remote control or the control panel to enter the Options of the Setting Menu.

[Photo] (default): for viewing photos or text with photos, making photos more colorful.

[Text]: for viewing text files, making the text clearer.

[Gray]: for viewing black & white photos which will make the grayscale differentiation distinct.

English - 24

Image 25

Contents Document Camera Table of Contents Chapter Troubleshooting Connecting to Microscope DIP Switch SettingsCopyright Information Safety Instructions  FCC Warning  Precautions EN55022 CE Radiation Warning Package Contents Product Overview Relative position of the presenter and document System diagram Installation and ConnectionsInstallation and setup Connecting to a projector or monitor Connecting to a computer and use Lumens software Connect to a PC and read the SD card Connecting to an Interactive Whiteboard IWBConnecting to a speaker Connecting to an HdtvConnecting to a TV Connecting to a Computer with RS232Installing application software Start Using Functions of control panel and remote control Control Panel/Remote Control and Setting MenuEnable/Disable the Partial Enlarged mode Remote control Enter Mask/Spotlight mode Remote controlStored image files Remote control Main menu Setting MenuImage Quality Medium Set up menuﺔﻴﺑﺮﻌﻟا Factory Reset Mask Mode Setting MenuSplash Setting Windows 4Spotlight Mode Setting MenuWould like to switch the image mode Would like to switch image sourcesDescriptions of major functions Would like to make text clearer and photos more colorfulWould like to zoom in/out images Would like to adjust the brightnessWould like to use the auto focus Would like to turn on/off the lampWould like to freeze images Setting the quality of captured imagesWould like to rotate the image Want to capture imagesWould like to record videos Setting continuous captureRecording motion images Would like to view captured/recorded images Recording setupPlaying videos Would like to delete the captured/recorded images Use Remote controlWould like to enlarge a part of the image PAN Use control panelWould like to set the size of Mask Would like to use the Mask and Spotlight functionWould like to play the slides Slide Show Setting delay timeWould like to reduce the image noise Projector Type Using OSD menuUse Compound Key Would like to change the splash screenComputer-related functions Would like to use a SD cardWould like to insert a photo in MS-Paint Would like to insert images in PhotoshopWould like to set the DC170 as a PC Camera When using the control panel or remote control Connecting to MicroscopeXGA output default values Sxga output Wxga output DIP Switch Settings4 1080P output Troubleshooting Outputted from ImagesDC170 are too Bright, dark or vague Unable to record Operating steps