Lumens Technology DC170 Would like to reduce the image noise Projector Type, Using OSD menu

Page 33

2.Press [], [], [], or [] to select the file to be compared.

3.Press [PIP] to activate image comparison.

4.Press [], [], [], or [] to move the live image.

5.Repeat Steps 1 - 3 to change other image files.

6.Press [MENU] to exit.

7.20I would like to reduce the image noise (Projector Type)

1.This function enables Document Camera to automatically clear image noise. The noise is especially obvious when Document Camera is connected to a DLP projector. You can set the DLP projector to improve the image quality.

2.If there is special noise when VGA out is connected, please set DLP option to improve the image quality.

2.1.Press [MENU] on the remote control or control panel to enter the setting menu.

2.2.Press [], [], [], or [] to select [Setting].

2.3.Press [ENTER] key to enter.

2.4.Press [] or [] to select [Control].

2.5.Press [] to enter [Projector Type].

2.6.Press [] or [] to select [LCD/DLP].

2.7.Press [MENU] to exit.

7.21I would like to resume the factory default settings (Factory Reset)

7.21.1Using OSD menu

1.Press [MENU] on the remote control or control panel to enter the setting menu.

English - 32

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Document Camera Table of Contents Chapter Troubleshooting Connecting to Microscope DIP Switch SettingsCopyright Information Safety Instructions  Precautions  FCC Warning EN55022 CE Radiation Warning Package Contents Product Overview Relative position of the presenter and document System diagram Installation and ConnectionsInstallation and setup Connecting to a projector or monitor Connecting to a computer and use Lumens software Connect to a PC and read the SD card Connecting to an Interactive Whiteboard IWBConnecting to a speaker Connecting to an HdtvConnecting to a TV Connecting to a Computer with RS232Installing application software Start Using Functions of control panel and remote control Control Panel/Remote Control and Setting MenuEnter Mask/Spotlight mode Remote control Enable/Disable the Partial Enlarged mode Remote controlStored image files Remote control Main menu Setting MenuImage Quality Medium Set up menuﺔﻴﺑﺮﻌﻟا Factory Reset Mask Mode Setting MenuSplash Setting Windows 4Spotlight Mode Setting MenuWould like to switch the image mode Would like to switch image sourcesDescriptions of major functions Would like to make text clearer and photos more colorfulWould like to zoom in/out images Would like to adjust the brightnessWould like to use the auto focus Would like to turn on/off the lampWould like to freeze images Setting the quality of captured imagesWould like to rotate the image Want to capture imagesSetting continuous capture Would like to record videosRecording motion images Recording setup Would like to view captured/recorded imagesPlaying videos Would like to delete the captured/recorded images Use Remote controlWould like to enlarge a part of the image PAN Use control panelWould like to set the size of Mask Would like to use the Mask and Spotlight functionWould like to play the slides Slide Show Setting delay timeWould like to reduce the image noise Projector Type Using OSD menuUse Compound Key Would like to change the splash screenComputer-related functions Would like to use a SD cardWould like to insert a photo in MS-Paint Would like to insert images in PhotoshopWould like to set the DC170 as a PC Camera When using the control panel or remote control Connecting to MicroscopeXGA output default values Sxga output Wxga output DIP Switch Settings4 1080P output Troubleshooting Outputted from ImagesDC170 are too Bright, dark or vague Unable to record Operating steps
Top Page Image Contents