SPECIFICATIONS:
Display | 2000 count LCD display |
| ||
Sensor | Silicon photodiode and filter |
| ||
Measuring | 200,2000, 20000,200000 Lux |
| ||
Range | 20,200,2000,20000 Footcandles |
| ||
Accuracy | ±3% (Calibrated to standard incandescent lamp 2856°K) | |||
+/- 6% all other visible light sources |
| |||
|
| |||
Angle deviation |
| 30° |
| ±2% |
from cosine |
| 60° |
| ±6% |
characteristics |
| 80° |
| ±25% |
Power Supply | 9V NEDA 1604, IEC 6F22, JIS 006P battery x 1pc | |||
Battery life | Approximately 200 hours |
| ||
| Meter: | 1.5 (H) x 2.2 (W) x 5.1 (L) in. |
| |
Dimensions |
| 38 (H) x 55 (W) x 130 (L) mm |
| |
Sensor | 9.8 (H) x 2.2 (W) x 3.1 (L) in. |
| ||
|
| |||
|
| 25 (H) x 55 (W) x 80 (L) mm |
| |
Weight | Approx. 8.8 oz. (250 g) with battery |
| ||
Accessories | User’s manual,carrying case, 9V battery |
| ||
Length of cable for light sensor: Approx. 59 in. (1.5M)
Operating Environment: Indoor use only. This instrument has been designed for use in an environment with pollution degree 2. Operation Altitude: Up to 2000M.
Operating Conditions: 14 to 104
Storage Conditions:14 to 104
EMC: EN61326(1997)+A1(1998)+A2(2001)
MAINTENANCE:
BATTERY REPLACEMENT
WARNING
If the symbol ” 
” appears on the LCD replace the battery immediately.
When the battery power falls low, the battery symbol ” 
” will appear on the display. Replace the one (1) 9V battery by removing the battery cover and accessing the battery compartment. Observe polarity when replacing the battery. Install the battery cover.
4