Harbor Freight Tools 94634 Product Specifications, Save this Manual, General Safety Rules

Page 2

PRODUCT SPECIFICATIONS

Electrical Requirements

115 V~ / 60 Hz

 

 

Amperage

5.5 (Start-Up) / 3.2 (No Load)

 

 

Motor

3/4 HP; 1730 RPM

 

 

Power Switch

2-Position (ON/OFF) Slide

 

 

Power Cord

5’1” Long / 14 AWG x 3C (SJT)

 

 

Power Plug

3-Prong, Grounded

 

 

Wheel Type

Pneumatic / 8-1/2” Diameter x 2” Wide / 30 PSI Inflation Rating / 2-Ply

 

 

Concrete Opening

17-7/8” Long x 9-3/8” Wide

 

 

Overall Dimensions

42” Long x 19” Wide x 34” High

 

 

Accessories

4” x 6” Mower’s Edge Slip Form

 

4” x 6” Slant Style Slip Form

 

4” x 6” Curb Style Slip Form

 

 

Additional Features

Quick Feed Hopper with Hopper Handle

 

Extended Power Stroke Compaction Ram

 

Quick Release Slip Forms

 

Red Powder-Coated Exterior Housing

 

 

Unit Weight

168 lb.

 

 

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, op- erating, inspection, maintenance and cleaning procedures, parts list and assem- bly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result

in electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the pres- ence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.

SKU 94634

For technical questions, please call 1-800-444-3353

PAGE 2

Image 2
Contents For technical questions or replacement parts, please call Curb Machine KIT With FormsSave this Manual Product SpecificationsGeneral Safety Rules Work AreaElectrical Safety Personal SafetyService Tool USE and CareSpecific Safety Rules Industrial applications must follow Osha guidelinesKeep all safety guards in place and in proper working order Grounding Grounded Tools Tools With Three Prong PlugsSee Figure C, next See Figure C120 or 240 Volt UnpackingNameplate Extension Cord Length At full loadProduct Overview Product FeaturesSee Figure E, and Assy. Diagram See Figure E, nextFigure E Assembly Instructions To Install a Slip FormSetting UP the Curb Machine See Figure E SKU For technical questions, please callGround Preparation Trenching Guide New Landscape Before SodOperating The Curb Machine Mixing the ConcreteOperating Instructions Hand Troweling Installing Curbing In a Straight LineSee Figure E Feeding The Hopper Finishing Into a Solid Object Installing Curved CurbingInstalling Circles Cutting Control JointsCaring For The New Curbing When The Job Is FinishedSealing INSPECTION, MAINTENANCE, and Cleaning See Assy. Diagram SKU For technical questions, please callTroubleshooting Problem Possible SolutionParts List Please Read the Following CarefullyAssembly Diagram 1715 1718 27 26 2122 243 6158 6359 6449Limited 1 Year warranty