Harbor Freight Tools 94634 operating instructions Troubleshooting, Problem Possible Solution

Page 20

TROUBLESHOOTING

Problem		Possible Solution
Curb Machine will not turn on.	1. Make sure the Power Switch is in its “ON” position.
	2.	Make sure to use the proper size extension cord.
	3.	Make sure the extension cord is connected to a working, 115
		volt, grounded, electrical outlet.
	4.	Have a qualified service technician examine the machine.
Curb Machine extrudes poorly.	1. Make sure to properly mix the cement, sand, and water.
	2.	Make sure the Slip Form is properly attached to the machine.
	3.	Make sure to properly feed the Hopper.
	4.	Make sure the Compaction Ram is moving freely on its Track.
	5.	Make sure the Crank Arm has been properly adjusted (length
		and stroke of the Compaction Ram) for the job at hand.
	6.	Have a qualified service technician examine the machine.

For technical questions, please call 1-800-444-3353

PAGE 20

Image 20

Contents For technical questions or replacement parts, please call Curb Machine KIT With FormsProduct Specifications General Safety RulesSave this Manual Work AreaElectrical Safety Personal SafetyService Tool USE and CareSpecific Safety Rules Industrial applications must follow Osha guidelinesKeep all safety guards in place and in proper working order Grounding Grounded Tools Tools With Three Prong PlugsSee Figure C, next See Figure CUnpacking Nameplate Extension Cord Length120 or 240 Volt At full loadProduct Features See Figure E, and Assy. DiagramProduct Overview See Figure E, nextFigure E Assembly Instructions To Install a Slip FormSetting UP the Curb Machine See Figure E SKU For technical questions, please callGround Preparation Trenching Guide New Landscape Before SodOperating The Curb Machine Mixing the ConcreteOperating Instructions Hand Troweling Installing Curbing In a Straight LineSee Figure E Feeding The Hopper Installing Curved Curbing Installing CirclesFinishing Into a Solid Object Cutting Control JointsCaring For The New Curbing When The Job Is FinishedSealing INSPECTION, MAINTENANCE, and Cleaning See Assy. Diagram SKU For technical questions, please callTroubleshooting Problem Possible SolutionParts List Please Read the Following CarefullyAssembly Diagram 1715 1718 27 26 2122 243 6158 6359 6449Limited 1 Year warranty