Ikelite 6871.07 instruction manual Specifications

Page 3

Table of Contents - continued

............................................................................	P. 22
Pre-Dive Your System	P. 22
Lubricants	P. 22
........................................................	P. 23
....................................	P. 25
Accessory Mounting Points	P. 25
EV-Controller Use	P. 25
..................................................................	P. 26
Storing the Housing	P. 29
..................................................................	P. 29
....................................................................	P. 29
........................................................	P. 30
........................................................	P. 31
................................	P. 31
..................................................	Back Cover

Specifications

Controls	All important camera functions are accessible. Controls
	not provided for Diopter Adjustment and Flash Button.
Width	9.5in (240mm) including controls
Height	6.7in (170mm) including controls
Depth	6.5in (165mm) including controls
Weight	5.5lb (2.5kg) without tray & handles
Buoyancy	Neutral in freshwater; Dependant on lens & port
Built-in Flash	No
Strobe Connection ..	Ikelite digital TTL electrical bulkhead
Tray Mounting	12-24 thread with 3in spacing (76mm)

3

Image 3

Contents Canon EOS 7D SLR-DC HousingTable of Contents Specifications Preparation Package ContentsSide View Parts of the Housing Front ViewBack View Opening the Housing Initial Camera SetupSetting the Conversion Circuitry Strobe ID Switch Housing Conversion CircuitryMode and Compensation Buttons Using the Conversion Circuitry Set DS Substrobe to TTL modeAttaching the Flash Connection for External Strobes DS50 and DS125 Substrobe CompatibilityInstalling Camera in Housing Attaching Camera to Housing TrayFinal Check Closing the HousingTurn Camera On Attaching a Sync Cord to the HousingZoom Clamps & Gear Sleeves Included with Housing Preparing to Install Zoom Clamp & Gear SleeveInstalling the Zoom Clamp & Gear Sleeve On the Type 1 Lenses Figure D Type 1 LensesInstalling the Zoom Clamp & Gear Sleeve On Type 2 Lenses Manual Focusing Installing Zoom Clamp/Sleeve on Type 2 LensesInstalling the Port Installing the Port To Remove Port Port Seal Inside ViewLens Ports Attaching an Ikelite Strobe Arm to the Housing Handle Usage Pre-Dive Your SystemLubricants Problem Solution TroubleshootingAny trapped moisture forming fog on the lens port Recommended Accessories Accessory Mounting PointsEV-Controller Use Control Maintenance MaintenanceDiagram B Housing Maintenance Storing the Housing Spare PartsPhoto Tips Photo Tips Technical SupportLimited Warranty Returning Products For ServiceReturning Products for Service outside the United States Product Registration