power light on top of Control Handle will be lit. Use this dial to adjust the brightness of LEDs near Camera.
3.Slide ON/OFF switch on right side of Monitor (3) to “ON” position. Press the POWER button on Monitor. Power Light on Monitor will be green and Monitor will display live camera image.
Power Light
Power Button
Orientation Control
Brightness Control
Contrast Control
To Use With T.V. or Monitor
The Inspection Camera may be used with a T.V. or Monitor by connecting the mini plug of the Extension Cable
(9)to the video “OUT” jack. Next connect the RCA plug to the video “IN’ jack on your T.V. or Monitor.
In this mode the Monitor (3) must be removed from the camera. Turn the Monitor (3) “ON” and turn the camera “ON” and the picture will be transferred to the T.V./Monitor remotely.
Monitor
4.Use buttons on Monitor to adjust brightness, contrast and orientation.
5.Bend Camera cable as needed to adjust access to different locations.
6.Use accessories as needed to see or retrieve small items.
7.To prevent accidents, turn off all power to components after use. Clean, then store the tool indoors out of children’s reach.
REV 09k
SKU 66550 | For technical questions, please call | Page 8 |