Silvercrest KH 2130 manual Disposal, Importer, Disruptions in remote control commands

Page 12

>Check the CINCH and AV connec- tions on the connected devices as well as on the transmitter q and the receiver d.

>If you are using other radio devices (same frequency), this may result in disruptions. It may also affect the range of the radio transmission set.

>The signal source must be switched on (i.e. DVD player) and playback started.

Poor transmission quality

>Change the direction of the transmit- ter q and the receiver d.

>Change the channel setting s/l on both components. Make sure that the transmitter q and the receiver d have the same setting.

>If you are using other radio devices (same frequency), this may result in disruptions. It may also affect the range of the radio transmission set.

Disruptions in remote control commands

>Point your remote control directly at the infrared receiver f. Otherwise the commands cannot be executed.

>Fasten the infrared transmission di- odes of the infrared cable 2# slightly offset to the infrared receiver of the signal source.

>If you are using other radio devices (same frequency), this may result in disruptions. It may also affect the range of the radio transmission set.

Disposal

Do not dispose of the device in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC.

Arrange for the product, or parts of it, to be disposed of by a professional dis- posal company or by your communal waste facility.

Observe the currently applicable re- gulations. In case of doubt, please contact your waste disposal centre.

Dispose of packaging materials in an environmentally responsible manner.

Importer

KOMPERNASS GMBH BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

- 10 -

Image 12
Contents Radio SET Gesundheit und Sicherheit gemäß § 3 1 1. Artikel 3 1 a Content Contents Intended UseTechnical data Safety instructionsRisk of electric shocks Risk of fire Risk of suffocationRisk of accidents and injury Damage to the deviceConnecting the transmitter Device componentsPutting the device into use Important noticeInfrared connection Observe the colour codingConnecting the receiver Switching onTips Video card must have an Fbas output availableCleaning TroubleshootingImproving the transmission quality Expansion optionsDisruptions in remote control commands DisposalImporter Important warranty information Processing number RMA number as well asPage Indholdsfortegnelse Side Anvendelsesområde Medfølger ved købPads til fastsætning af infrarøde sendedioder BetjeningsvejledningTekniske data SikkerhedsanvisningerFare på grund af elektrisk stød Info om afbrydelse fra strømmen BrandfareFare for kvælning Fare på grund af radiosignaler Fare for ulykker og personskaderSkader på apparatet Brug ikke aggressive kemiske substan- ser til rengøringApparatets dele Opstart af apparatetTilslutning af senderen Vigtige informationer inden opstartInfrarød-forbindelse Tænd for signalkilden igen, og start evt. afspilningen Tilslutning af modtagerenSørg for, at farvetildelingen er rigtig VigtigtForbedring af overførselskvaliteten Kanalindstilling parallelfunktionRengøring UdvidelsesmulighederBortskaffelse ImportørFejl ved fjernbetjeningskommandoerne Et administrationsnummer RMA- nummer samt Vigtige garantioplysninger