ENGLISH
Playback
Playing Back a Tape on the LCD Screen
✤The Playback function and speaker works only in <Player> mode. ➥page 19
✤You can monitor the playback picture on the LCD Screen.
1.Set the [Power] switch to [PLAYER].
2.Set the [Mode] switch to [TAPE].
3.Insert the tape you wish to view. ➥page 32
4.Open the LCD Screen.
■Adjust the angle of the LCD Screen and set the brightness or color if necessary.
5.Press the [œœ (REW)] button to rewind the tape to the starting point.
■To stop rewinding, press the [■ (STOP)] button.
■The Camcorder stops automatically after rewinding is completed.
6.Press the [√❙❙ (PLAY/STILL)] button to start playback.
■You can view the picture you recorded on the LCD Screen.
■To stop the play operation, press the [■ (STOP)] button.
Adjusting the LCD Bright/LCD Color during Playback
✤You can adjust the LCD Bright/LCD Color during playback.
✤The adjustment method is the same procedure as used in <Camera> mode. ➥page 29
Adjusting the Volume
✤When you use the LCD Screen for playback, you can hear recorded sound from the built- in Speaker.
-Take the following steps to lower the volume or mute the sound while playing a tape on the Camcorder.
✤When sound is heard once the tape is in play, use the [… / †] button to adjust the volume.
■ A volume level display will appear on the LCD Screen.
■ Levels may be adjusted from anywhere between <00> to <19>.
■ If you close the LCD Screen while playing, you will not hear sound from the speaker.
✤When the Audio/Video cable is connected to the Camcorder, you cannot hear sound from the
5 6
√ | SP 0:46:00:11 |
60min
[05]
60