ENGLISH
Digital Still Camera Mode (SC-D375(H)/D975 only)
Setting the File Number
✤File Number setting works only in <M.Cam> mode. ➥page 19
✤File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.
✤File numbers may be set as follows:
-<Series> : When there are existing files, the new image will be named as the next number in the sequence.
-<Reset>: When there are no files stored on the Memory Card, the file numbering starts from 0001.
1. Set the [Power] switch to the [CAMERA].
2.Set the [Mode] switch to [CARD].
3.Press the [MENU] button. ■ The menu list will appear
4.Press the [… / †] button to select <Memory>, then press the [OK] button.
4 | M.Cam Mode |
|
| |
| √Memory |
|
| |
| Photo Quality | √Super Fine | ||
| File No. | √Series | ||
| Move | OK Select | MENU Exit | |
5.Press the [… / †] button to select <File No.>, then press the [OK] button.
6.Press the [… / †] button to select the desired option <Series> or <Reset>, then press the [OK] button.
7.To exit, press the [MENU] button.
6 | M.Cam Mode |
|
|
| |
| Back |
|
| Photo Quality |
|
| File No. | Series |
|
| Reset |
Move OK Select MENU Exit
[ Note ]
When you set <File No.> to <Series>, each file is assigned with a different number so as to avoid duplicating file names. It is convenient when you want to manage your files on a PC.
76