Connecting to a Power Source
INFORMATION
Important information about battery usage
●When the camera is not used, turn off the camera power.
●Please remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera.
●Low temperatures (below 0˚C) can affect the performance of the battery and you may experience reduced battery life.
●Batteries will usually recover at normal temperatures.
●During extended use of the camera, the camera body may become warm. This is perfectly normal.
■There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery |
|
|
|
|
|
|
|
|
|
| |
indicator |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| |
Battery | The battery is | Low battery capacity | Low battery capacity | Low battery capacity | |||||||
(Prepare to recharge | (Prepare to recharge | (Prepare to recharge | |||||||||
status | fully charged | ||||||||||
or use spare battery) | or use spare battery) | or use spare battery) | |||||||||
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
| |
■Insert the battery as shown
-If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ /
-When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover.
Inserting the memory card
■Insert the memory card as shown.
- Turn off the camera’s power before inserting the memory card.
- Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor).
-Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.
《9》