Samsung S500 user manual Special Effect Photo Frame, + / button, Rgb

Special Effect : Photo Frame

■You can add 9 types of frame-like borders to a still image you want to capture.

1. Press the E button in any recording mode
(except for MOVIE CLIP and AUTO mode).
2. Select the (	) menu by pressing the Left /
Right button.
3. Select a desired sub menu by pressing the Up /
Down button and press the OK button.		Photoframe

- : The photo frame will not be added.

+ / - button

■You can use the + / - button to adjust the values for the RGB, ISO, white balance and exposure compensation.

Main menu	Sub menu	Available camera mode
RGB	R (Red), G (Green), B (Blue)
ISO	AUTO, 50, 100, 200, 400
	AUTO, DAYLIGHT, CLOUDY,
WHITE BALANCE	FLUORESCENT H,
	FLUORESCENT L, TUNGSTEN,
	CUSTOM.
Exposure compensation	-2.0~0.0~+2.0 (0.5EV steps)

4.The photo frame will appear.

Press the shutter button to capture an image

※Before taking a picture, you can change the frame by pressing the + / - button. Change the frame type by pressing the Up / Down / Left / Right button.

Capture:Shutter Frame:+/-

■RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of

the images to be captured.

●Setting RGB Values

1. Press the + / - button, and then use the UP and

DOWN buttons to select the RGB icon ( ). The RGB menu bar will appear as shown.

2. Use the UP / DOWN / LEFT and RIGHT buttons to select the desired RGB value.

-Up / Down Button : Navigates between R, G, and B icons.

-Left / Right Button : Changes value of each icon.

3.When you press the + / - button again, the value you set will be saved and RGB setup mode will end.

※When special effect (colour) from the icon other than is selected, it will not be able to select the RGB.

《28》