Start up sound
■You can select the sound that is activated whenever the camera is turned on.
Important notes
Be sure to observe the following precautions!
●Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3]
-If the start up image is set to [Off], the start up sound will not activate, even though you may have set these to on.
MYCAM | |
Start Image | Off |
Start Sound | Sound 1 |
Shutter Sound | Sound 2 |
| Sound 3 |
Back: | Set:OK |
■This unit contains precision electronic components. Do not use or store this unit in the following locations.
-Areas exposed to severe changes in temperature and humidity.
-Areas exposed to dust and dirt.
-Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
-Environments where there is high magnetism or excessive vibration.
-Areas with high explosives or highly flammable materials.
■Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothball), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when not planning to use the camera for a long period of time
Shutter sound
■Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches, coastal |
dunes, or other areas where there is lots of sand. |
■You can select the shutter sound.
●Shutter sound : [Off], [Sound 1], [Sound 2], [Sound 3]
MYCAM | |
Start Image | Off |
Start Sound | Sound 1 |
Shutter Sound | Sound 2 |
| Sound 3 |
Back: | Set:OK |
- Doing so may result in failure or may permanently render the camera unusable. |
■Handling the camera
-Never drop the camera or subject it to severe shocks or vibrations.
-Protect the large size LCD monitor from an impact. When this camera is not used, keep it in the camera case.
-Avoid obstructing the lens or the flash when you capture an image.
-This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.
-If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit.
《59》