Samsung SHC-730N/P instruction manual Connecting to Monitor, Mounting a C-Mount lens

Page 10

Connection

Mounting a C-Mount lens

1. Attach the C-Mount lens adapter by turning clockwise.

2. Attach the lens to the camera by turning clockwise.

Connecting to Monitor

Connect the VIDEO Out jack to the monitor VIDEO In jack.

CCD Camera

Monitor

As the connecting method varies with the instruments, refer to the manual supplied with the instrument.

If necessary, you can connect the monitor to the REMOTE jack on the back of your camera. For details, see page 40.

Only connect the cable when the power is turned off.

Set the 75Ω/Hi-Z selection switch as shown below if you have an intermediate device.

Intermediate

End monitor

CCD Camera

COLOR CCD CAMERA 18 User’s Manual

COLOR CCD CAMERA 19 User’s Manual

Image 10
Contents SHC-730N/P Page Day & Night Stop using your camera when you find a malfunctionHigh Resolution Camera needs periodic inspectionContents Or spill beverage on it Radioactivity PrecautionsCamera Composition Tripod Mounting Bracket Screw Hole Menu Setup Buttons Auto Iris Lens Connector DC/VIDEO Selection Switch Name and Function of Each SectionInstalling Auto Iris Lens ConnectionMounting a CS-Mount lens Installing C/CS-Mount lensVideo type DC type Connecting to Monitor Mounting a C-Mount lensConfiguration of The Menu Connecting to PowerOperating Your Camera Setting Up The Menu Camera IDPress SET button If you make a mistake while entering nameBacklight White Balance ControlMotion Detection When using Auto Iris Lens with Video type Tips on Using the Motion Detection FeatureLens Selection Shutter Speed Control FLK1/100 for Ntsc Model,1/120 for PAL ModelAGC Auto Gain Control Sense upSSNRSamsung Super Noise Reduction Special‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power Using Remote Jack / MD Output / D&N Input Setup menu CommandProblem TroubleshootingProblem Solution Specifications PAL SHC-730PMemo
Related manuals
Manual 24 pages 60.29 Kb