Samsung SHC-730N/P instruction manual Precautions, Or spill beverage on it Radioactivity, Camera

Page 5

Precautions

Do not install the camera in extreme temperature conditions.

Do not install or use the camera in an environment where the humidity is high.

Do not drop the camera or subject them to physical shocks.

Never keep the camera face to strong light directly.

Only use the camera under conditions where temperatures are between -10˚C and +50˚C. Be especially careful to provide ventilation when operating under high temperatures.

It can cause the image quality to be poor.

It can cause malfunctions to occur.It can damage the CCD.

Do not expose the camera to rain

 

Do not expose the camera to

or spill beverage on it.

 

radioactivity.

Do not install the camera under

 

Do not touch the front lens of the

unstable lighting conditions.

 

camera.

If it gets wet, wipe it dry immediately. Liquids can contain minerals that corrode the electronic components.

Notes

If it is exposed to radioactivity,

For heated CCD, it will be out of order.

Severe lighting change or flicker can

It is one of the most important parts of

cause the camera to work improperly.

the camera. Be careful not to be stained

 

by fingerprint.

If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur.

Please check that the power satisfies the normal specification before connecting the camera.

COLOR CCD CAMERA 8 User’s Manual

COLOR CCD CAMERA 9 User’s Manual

Image 5
Contents SHC-730N/P Page High Resolution Stop using your camera when you find a malfunctionDay & Night Camera needs periodic inspectionContents Camera PrecautionsOr spill beverage on it Radioactivity Tripod Mounting Bracket Screw Hole CompositionDC/VIDEO Selection Switch Auto Iris Lens ConnectorMenu Setup Buttons Name and Function of Each SectionConnection Installing Auto Iris LensVideo type DC type Installing C/CS-Mount lensMounting a CS-Mount lens Mounting a C-Mount lens Connecting to MonitorOperating Your Camera Connecting to PowerConfiguration of The Menu Camera ID Setting Up The MenuIf you make a mistake while entering name Press SET buttonWhite Balance Control BacklightMotion Detection Lens Selection Tips on Using the Motion Detection FeatureWhen using Auto Iris Lens with Video type FLK1/100 for Ntsc Model,1/120 for PAL Model Shutter Speed ControlSense up AGC Auto Gain ControlSpecial SSNRSamsung Super Noise Reduction‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power Setup menu Command Using Remote Jack / MD Output / D&N InputProblem Solution TroubleshootingProblem PAL SHC-730P SpecificationsMemo
Related manuals
Manual 24 pages 60.29 Kb