Samsung SHC-730N/P instruction manual

Page 2

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION -This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING - Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified. Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

Image 2
Contents SHC-730N/P Page Day & Night Stop using your camera when you find a malfunctionHigh Resolution Camera needs periodic inspectionContents Camera PrecautionsOr spill beverage on it Radioactivity Composition Tripod Mounting Bracket Screw HoleMenu Setup Buttons Auto Iris Lens ConnectorDC/VIDEO Selection Switch Name and Function of Each SectionInstalling Auto Iris Lens ConnectionVideo type DC type Installing C/CS-Mount lensMounting a CS-Mount lens Connecting to Monitor Mounting a C-Mount lensOperating Your Camera Connecting to PowerConfiguration of The Menu Setting Up The Menu Camera IDPress SET button If you make a mistake while entering nameBacklight White Balance ControlMotion Detection Lens Selection Tips on Using the Motion Detection FeatureWhen using Auto Iris Lens with Video type Shutter Speed Control FLK1/100 for Ntsc Model,1/120 for PAL ModelAGC Auto Gain Control Sense upSSNRSamsung Super Noise Reduction Special‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power Using Remote Jack / MD Output / D&N Input Setup menu CommandProblem Solution TroubleshootingProblem Specifications PAL SHC-730PMemo
Related manuals
Manual 24 pages 60.29 Kb