Sony DPF-XR100 Inserting a memory card, When you insert a memory card, About the B and C slots

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\050C03.fm Master: Left.L0

010COV.book Page 14 Wednesday, August 25, 2010 12:06 PM

Let’s view an image

PNote

When using a memory card of the following types, make sure to insert it in an appropriate adaptor.

If you insert it without an adaptor, you may be unable to remove it. As shown in the right-most illustration below, make sure to insert the following types of memory cards with inserted in the appropriate adaptor.

1miniSD/miniSDHC

1miniSD/ miniSDHC adaptor

2microSD/microSDHC

2microSD/ microSDHC adaptor

3“Memory Stick Micro”

“M2” adaptor (standard size)

3

“M2” adaptor (Duo size)

*A CompactFlash card can be used with the DPF-XR100 only.

zTip

•S-Frame fails to auto rotate if:

–An image file has been shot with a DSC which doesn’t support Exif rotate tag recording.

–An image file is retouched and saved with retouching software which breaks the Exif rotate tag.

Inserting a memory card

Insert a memory card firmly into the corresponding slot with its label side facing toward you (when you are facing the back side of the photo frame).

CompactFlash	Access lamp
card* (Slot A)

xD-Picture Card (Slot B)

SD memory card

(Slot B)

“Memory

Stick” (Slot B)

“Memory Stick Duo” (Slot C)

When you insert a memory card

The images on the memory card are automatically displayed.

If you switch off the power while they are being displayed

If you switch the power back on, the same images continue to be displayed.

If the access lamp does not flash

Reinsert the memory card after checking the label side of the memory card.

About the B and C slots

If you insert memory cards both into the B and C slots simultaneously, the photo frame will not work properly.

14 GB

DPF-XR100/VR100 4-259-440-11(1)