Sony Guide to Operating the DPF-XR100 Digital Photo Frame

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-XR100_IM\0825M_4259434111XR100.VR100_IM_GB\060C04.fm Master: Right

010COV.book Page 29 Wednesday, August 25, 2010 12:06 PM

Operating an external device connected to the photo frame

You can connect a mass-storage-compatible digital camera, USB memory device, photo storage device, or other external device to the photo frame and display an image directly from the external device.

1 Connect the AC power adaptor to the photo frame and connect the AC power adaptor to an AC outlet.

2 Set the digital camera or external device to mass storage connection mode.

(If you are using a Cyber-shot, set “USB Connect” to [Normal] or [Mass Storage].)

3 Turn on the photo frame.

4 Connect the digital camera or external device to the USB A connector on the photo frame.

External memory or other external device

PNotes

•We cannot guarantee connection with all types of external devices.

•The playback device will be switched to the external device if you connect the external device to the USB A connector during playback of the image in the internal memory.

•When using a commercially available USB cable, use an A- Type USB cable that is less than 3 meters long.

•Use a USB cable with the USB logo.

•Do not disconnect the USB cable or turn the photo frame and external device off while the access lamp on the external device is flashing. Doing so may damage the data stored in the external device. Sony assumes no responsibility for any damage or loss of data.

•A USB hub or USB device with a built-in USB hub may not work properly.

•The photo frame cannot use data that has been encrypted or compressed using, for instance, fingerprint authentication or a password.

Try using various functions

5 Select the playback device.

29 GB

DPF-XR100/VR100 4-259-440-11(1)