010COV.book Page 26 Wednesday, August 25, 2010 12:06 PM
zTip
Perform firmware update or system initialization of the photo frame in the following cases:
Maintenance mode
Activating maintenance mode
Firmware update:
Firmware update allows you to obtain optimum performance and use the photo frame with upgraded functions.
System initialization:
When your photo frame does not start properly, initialize the system of the photo frame. If the symptom persists, consult with your Sony dealer.
1
2
Confirm that the photo frame is turned off.
Press 
while holding down VIEW MODE on the photo frame to turn it on.
Hold down VIEW MODE until the following screen appears.
Maintenance mode is activated.
3 Press v/V to select [Update firmware ] or [Initialize system] and press 
.
Update firmware:
For detailed information on how to obtain an update file or how to update the firmware, access and view http://www.sony.net/ DPF.
Initialize system:
The operation screen is displayed.
Go to “Initializing the system” below.