Microsoft Windows 98 SE Installation
If you want to use your camera on a computer with a Microsoft Windows 98 SE operating system, then you must install the driver from the CD ROM included with the camera.
To do this, first use the USB cable to connect the camera to your computer. Then follow the steps described below.
1.The window shown above is displayed. Now insert the Driver CD ROM provided and click on [Continue >].
2.Select “Find the most suitable driver for this device” and then click on [Continue >].
3.Select “CD ROM Drive” and then click [Continue >].
4.Click [Continue >].
5.The installation is complete. Click [Finish].
6.My Computer.
The camera is now recognized and a new removable disk drive appears in My Computer. The drive letters displayed may differ, depending on the number of drives on your system.
39