18 Settings
This chapter describes how you can change general camera settings, such as the time and language. In order to change these settings, the camera must be switched on. It can, however, be in any mode. Press the Menu button 
to display the settings menu. If the light marking on the top edge of the screen is on the left side, then press f on the Navigation button 
to switch to the right entry “Setup”.
The menu above is displayed. You can use the
Navigation button 
(d and c) to choose between the following settings.
18.1 Set Clock
This setting allows you to set the date and time.
By using the Navigation button 
(e and f) you can switch between year, month, day, hour and minute. Choose c or d to set the values.
18.2 Auto OFF
With this setting you can set the camera to switch itself off if not in use after a certain amount of time.
You can use the Navigation button 
(e and f) to select the following time periods: 3min, 5min, 8min and Off
18.3 Beep
This setting allows you to activate or deactivate the beep made by the camera when certain buttons are pressed, such as when taking a photo.
To do this, use the Navigation button 
(e and f) to select “On”, to activate the beep, and “Off”, to deactivate it.
28