Pair a New Device
Your cameras are paired to the monitor at the factory to channels 1 and 2. You can add up to 2 more accessory cameras to your system; see our website at www.uniden.com for more information on how to buy accessory cameras for this system. When you add an accessory camera, you
have to pair it to the monitor (that is, you have “introduce” the camera and monitor so they can communicate).
Some things to know about pairing cameras:
•• If a camera is already assigned to the selected channel, the monitor overwrites that camera link with the new one.
•• Only pair one camera at a time! The monitor links to the first camera it detects. If two or more cameras are in pairing mode, you can’t control which camera the monitor will detect first.
1.From the Setup Detail Optons screen, use VOL+ and VOL- to select the camera being added. Press M. The PAIR A NEW DEVICE screen highlights the Pairing selection.
2. Press M again to begin camera pairing.
19