Activate or Deactivate
This feature "turns off" the camera so it won't be viewed on the monitor. The camera is still powered on, just not visible to the monitor. This feature is useful for viewing a single camera in full screen mode constantly and to record that camera in full screen (640 x 480) resolution.
1.With the Setup Detail Options screen displayed for a camera, press CH+ to highlight the Camera Activation selection.
2.Press CH+or CH- to activate or deactivate a camera/
Cameras not paired to the system cannot be activated.
3.Press M to accept the new setting and return to the Setup Detail Options screen. Select another camera if needed.
Recorder Setup
You can only record if the monitor is in LIVE view and an SD card is inserted.
21