Uniden UDS655 manual Record Time

1.From the Recorder Setup screen, use VOL+ and VOL- to select Setup Masking Area; press M to enter. The Setup Masking Area screen displays:

2.Use CH+ and CH- to select a camera (1 - 4) for setting up the masking area. Press M to enter the camera masking preview page.

3.A grid displays over the image on the screen. While in masking preview, use CH+, CH-, VOL+, and VOL- to select the masking block(s) where motion is to be ignored. Press M to confirm each selection. You can also press M again to unmask a block.

4.Press ESC to save the entire mask and return to the previous screen. Mask other cameras as needed.

Record Time

Use Record Time to set a specific length of time for motion recording. Options are 2, 5, or 10 minutes.

26