Strobe Recording
You can record strobe images (still pictures that capture continuous motion at 1/5 sec. intervals) of subjects with normal sound. You will find it useful when you want to produce a special effect while recording moving subjects such as your friends waving at you.
1 In Recording Standby mode, press the
MENU button untilappears.
Blue
S T - COU-
ROBE N T E R
2 Press the STROBE button (D) to set the VIEWCAM to Strobe Recording mode.
•“STROBE” changes from blue to yellow.
S T -
ROBE
Yellow
S T - COU-
ROBE N T E R
3 Press the REC START/STOP button to begin strobe recording.
To pause strobe recording
Press the REC START/STOP button again.
To cancel Strobe Recording mode
Press the STROBE button. “STROBE” returns to blue.
Note:
•The picture quality in this mode will be slightly lower than normal pictures.
Digital Image Stabilization (DIS)
The digital image stabilization (DIS) function lets you stabilize the image by electronically compensating for relatively small image shakes that are often annoying in
1 In Recording Standby mode, press the
MENU button until (MENU 1) appears.
2 Press the or button to select “DIS”, then press the SET button (B) to select “ON”.
3 Press the DISPLAY button to turn off the menu screen.
•The indicator appears on the monitor, and the VIEWCAM enters the DIS mode.
To return to normal recording mode
Select “OFF” in the step 2 above. The indicator will disappear.
Notes:
•While the DIS function is on, the image on the monitor is slightly magnified.
•Image resolution slightly decreases in DIS mode.
•Battery consumption is larger in DIS mode. We recommend that you not use the DIS function when using the VIEWCAM on a tripod.
•The DIS function will be less effective when the Digital Quick Zoom is on.
•The DIS function does not work with the Still Recording.
Caution:
•The DIS function cannot compensate for excessive image shakes, or for the subjects or situations described below.
Useful Features
28