Sharp VL AH 50 H operation manual Specifications, Viewcam

Page 68

References

Specifications

VIEWCAM

Signal System: PAL standard

Recording System: 2 rotary heads, helical scanning system Cassette: 8 mm video tape, MP type or Hi8 MP, ME type

Recording/Playback Time: 120 minutes (P5-120) Tape Speed: 20.051 mm/second

Pickup Device: 1⁄4 ″ (6.4 mm, effective size: 4.5 mm) CCD image sensor (with approx. 320,000 pixels including optical black)

Lens: 16× power zoom lens (F1.4, f=4.0–64.0 mm), and full-range auto focus

Lens Filter Diameter: 46 mm

Monitor: 3″ (7.5 cm) full-colour LCD screen (TFT active matrix) Microphone: Electret monaural microphone

Colour Temperature Compensation: Auto white balance with white balance lock Minimum Illumination: 0.8 lux* (with gain-up, F1.4)

Video Output Level: 1.0 Vp-p 75-ohm unbalanced

Audio Output Level: −8 dBs, impedance less than 2.2 kohms Speaker Output: 200 mW

Power Requirement: DC 3.6 V (with battery pack) DC 7.0 V (with AC adapter)

Power Consumption: 5.0 W (during camera recording in full auto mode with zoom motor off and backlight in normal mode)

Operating Temperature: 0°C to +40°C Operating Humidity: 30% to 80%

Storage Temperature: −20°C to +60°C

Dimensions (approx.): 183 mm (W) × 109 mm (H) × 99 mm (D)

Weight (approx.): 720 g (without battery pack, lithium battery, video cassette, and lens cap)

AC Adapter (UADP-0313TAZZ)

Power Requirement: AC 110–240 V, 50/60 Hz

DC Output: 7.0 V

Power Consumption: 15 W

Dimensions (approx.): 68 mm (W) × 37 mm (H) × 130 mm (D)

Weight (approx.): 233 g

Specifications are subject to change without notice.

*Minimum illumination: Since there is no widely accepted testing procedure for determining minimum illumination capability, lux ratings are comparable only between models from the same manufacturer.

References

61

Image 68

Contents VL-AH50H Power supply Special Note for Users in the U.K Blue Neutral Brown LiveAvoid placing Do not aim the lens at the sunAvoid shocks and dropping Recording Format LCD Monitor ScreenBattery pack CR2025 type Audio/video cable Lithium batteryRemote control × IiiTripod adapter For 180 recording Soft caseContents Useful Features Advanced FeaturesReferences Gamma Brightness CompensationWhen the cassette compartment door is open Part NamesOperation Summary Cassette compartment door pRear view Remote sensor pCamera Mode VCR ModeOn-screen Display Index 47 p 34 pQuick Reference Index Video cassette is defective and should be Battery Pack Inserting the Battery PackRemoving the Battery Pack Inserting and RemovingCharging the Battery Pack Recording and playback timesPowering the Viewcam from an AC Outlet Inserting and Removing a Cassette Inserting a CassetteRemoving a Cassette Perform above, then take out the cassetteInstalling the Lithium Memory BatteryBattery Removing the Lithium BatteryPress the SET button B Setting the Date and TimeChanging to the 12-hour Time Mode Using the Hand Strap and the Lens Cap Attaching the Shoulder StrapAttaching and Removing the Lens Cap LCD screen sideUsing the Sun Hood Attaching the Sun HoodClosing the Sun Hood Opening the Sun HoodEasy Camera Recording with Full Auto Mode To Turn the Power OffTo Pause Recording Maximum Continuous Recording and Actual Recording TimesBasic Operations Camera Recording ZoomingTips on Recording Positions Remaining Recording Time Display Remaining Battery Power DisplayApprox. remaining On-screen Recording time Indicator Volume Control PlaybackTo Stop Playback Auto Tape RewindWatching the Playback on a Turn on the Viewcam in VCR mode, and begin tape playback seeVideo Search StillSlow Basic Operations PlaybackOperations of the On-screen Controls Menu buttonDisplay button Operation buttonsDesired setting Press the SET button B to selectPress the or button C or D to select the desired menu item Perform steps 4 to 6 aboveRecording the Date and Time Press the or Button to selectPress the SET button B to select AUTO, ON, or OFF Press the button to select SelectSetting the Digital Zoom To return to optical zoomUsing Digital Quick Zoom Setting the Digital Quick Zoom RangesTo cancel Digital Quick Zoom Digital Quick Zoom Extend ZoomSelecting Still Recording Mode Using Still RecordingStill Recording Type of Still Recording ModesTo cancel Strobe Recording mode To return to normal recording modeStrobe Recording Digital Image Stabilization DISSelecting Fade Mode Using Fade ModePress the SET button B to select the desired fade mode Fade In and Fade OutTo use fade out only To cancel Fade modeQuick Review Quick Return Edit Search Recording Standby mode, press Menu button until appearsTo cancel Gamma Brightness Compensation Gamma Brightness CompensationTo obtain a brighter picture Press the Gama EFF. button a againTo cancel the gain-up function Gain-up Cat’s EyeWide Screen Macro ShotsRemoving the Lens Hood To return to normal pictureSelf Recording Normal Self RecordingMore Information on Self Recording To pause recording, press the REC Stop button BTo turn off the self-recording message screen Press the Message button in Recording Standby modeSelf-recording Message Setting the Viewcam to Full Auto Mode Useful FeaturesProgram Search Tape Counter Feature Using the CounterTo reset the counter to zero To turn off the tape counterPress the Play button D to view the desired scene Using the Counter MemoryDuring playback, press the Menu Button until appears Using the Remote Control Operating the Remote ControlInstalling the Batteries in the Remote Control Turning On the Remote Control ModeTo cancel the digital picture effect Advanced FeaturesDigital Picture Effects Type of Digital Picture EffectsType of Scene Settings To cancel the scene settingScene Menu Program AE Select Scene Menu in aboveSuperimposing a Title Changing the Preset Titles Press the Reset button to display the title input screenPress the or ß button Q to select Top of the screen and the cursor willTo cancel Manual Focus mode Auto/Manual FocusAuto Focus Manual FocusPress the White BAL. button. White BAL. returns to blue To cancel White Balance LockWhite Balance Lock Perform steps 1 and 2 above, then press the Auto button B To cancel Manual Exposure modeManual Exposure Picture-in-Picture Digital Dual PictureSelecting Digital Dual Picture Title Screen Picture/Backlight Adjustments Press the Menu button until Camera mode or VCR mode appearsPress the Exit button to turn off the adjustment screen Type of Backlight ModesTo cancel Gamma Playback Gamma PlaybackTurning Off the LCD Monitor Backlight Press the Gama EFF. button again. Gamma disappearsSetting Edit Mode EditingCutting Unwanted Sequences To stop editingUseful Information Hints for Better ShootingLighting Tips on Good LightingDew Formation Dirty Video HeadsBattery Pack Replacing the Fluorescent LampCleaning Using Your Viewcam AbroadReferences Video Cassette Tapes AC AdapterDemonstration Mode Cancelling Demo ModeButton and slide Power switch to Watching the DemonstrationBefore Requesting Service Power Camera mode Symptom Possible cause Suggested solutionVCR Specifications ViewcamPage Page Page 0P06-M-G