Graham Field 9000APS service manual Optional Pivot Assist BAR Installation & Operation

Page 23

Zenith aps seRies

OPTIONAL PIVOT ASSIST BAR INSTALLATION & OPERATION

INSTALLATION

1.At the head end of the bed, position the Pivoting Assist Bar (#2) bracket over the Head Deck (#1) frame and align the two holes in the Assist Bar bracket with the two holes in the frame rail on either side of the head deck.

2.From the outside, insert the Clevis Pins (#3) through the

holes in the pivot bracket and deck frame.

+($'

1

 

 



3. From the inside, insert a Hair Pin Clip (#4) through

(1'

 

 

 

each of the small holes in the clevis pins.

 

 

PLEASE ORDER KIT #ZA85400. KIT INCLUDES ONE PIVOTING ASSIST BAR ASSEMBLY AND TWO LANYARD ASSEMBLIES WITH CLEVIS PINS AND HAIR PIN CLIPS. (A STATIONARY ASSIST BAR IS ALSO AVAILABLE AS AN OPTION - KIT # ZA85000).

THE ASSIST BAR CAN BE POSITIONED ON EITHER THE RIGHT SIDE OR LEFT SIDE OF THE HEAD DECK.

IT IS NOT OFFERED FOR THE FOOT END OF THE BED.

Position the Assist Bar

Bracket ON TOP of the Deck Frame, aligning

holes in the bracket with2 holes in the frame.

D3

D3

E4

4E

SAMPLE SHOWS PIVOTING ASSIST BAR POSITIONED ON THE LEFT SIDE OF THE BED.

PIVOTING ASSIST BAR OPERATION

+($' (1'

5HFRPPHQG 3LYRW7RZDUG +HDGERDUG

%ODFN.QREWR /RFNRU5HOHDVH

1.To release the pivoting assist bar from its vertical lock position, hold onto the top of the bar with one hand and slightly pull out the black knob on the outside of the pivot assembly with the other hand to release the locking mechanism. For ease of patient access, it is recommended that you pivot the rail toward the headboard until it stops and rests in place.

2.To set the assist bar back to its upright locked position, grab the top of the assist bar with one hand and pivot the assembly upward until the black knob mechanism snaps into place, locking the assist bar vertically.



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



 

 

 

 

 

 



+($'

 

 

 

 

 

 

 

 

 

 

 

 

 

 

+($'

 

+($''(&.

 

 

'(&.

 

 

 

6/((3685)$&(

 

 

(1'

 

 

'(&.

 

 

 

 

 

(1'

 

 

 

 

 

!FOR YOUR SAFETY, MAKE SURE YOUR FINGERS ARE CLEAR OF THE SIDES OR UNDERNEATH THE PIVOTING ASSEMBLY WHEN PIVOTING THE ASSIST BAR UP OR DOWN.

Basic American Medical Products, a division of GF Health Products, Inc.

!PLEASE MAKE SURE THE PIVOT ASSIST BAR IS ALWAYS IN THE FULL, VERTICAL, LOCKED POSITION WHEN RESIDENT/PATIENT IS LEFT UNATTENDED.

 

 

 

 

 

23

 

www.grahamfield.com

999-0831-190A Service Manual

Image 23
Contents Instructions for USE Basic American Medical Products Important NoticeZenith aps seRies Operating Conditions Important Safety and Warning InformationWith Grounded Electrical Cable Typical APS 9000 BED Identification LabelsTypical SAFETY/WARNING BED Labels Entrapment & Compliance Information Zenith 9000 APS Electrical Zenith 9000 APS MechanicsDiscard Keep Unpacking Your BEDHeadboard HEAD- and Footboard AssemblyHeadboard Installation Footboard InstallationAttaching the Footboard Plugging in the Footboard NURSE/STAFF ControlRetainer Positions Standard Mattress Retainer InstallationHead Retainer Installation FOOT-END Retainer InstallationRemoval Standard Wireform Wallsaver InstallationWallsaver Assembly WallsaverWallsaver Removal Bracket InstallationBacklit Pendant BED Operations APS PENDANT/HAND ControllerLock OUT Single Functions BED Operations NURSE/STAFF Control PanelFoot END BED Operations Chair PositionBED Operations CPR/HEART Position Head ENDBED Operations TRENDELENBERG/REVERSE Trendelenberg 751/1%5Optional APS 9000 Series Electrical Components LinakAPS9000 Series Electrical Cabling Standard Battery Backup Cable Ground WireUnderbed Light Cable UBL APS9000 Series Electrical Cabling with Underbed LightMounted Battery Option Pivoting Assist BAR Operation Optional Pivot Assist BAR Installation & Operation  Optional Trapeze Support InstallationOptional Battery Backup Replacement Configurations Nothing Works no Power Troubleshooting Nothing Works no PowerTroubleshooting Staff Control Blinking Lights Hand Controller Function DOESN’T Troubleshooting Pendant & Double T-CABLENothing on Staff Control Works but Pendant Works Staff Control Works but PendantQuick Reference Troubleshooting Motor Cables & Control BOXHEAD, FOOT, or HI/LO Function not Working BED Looks Unlevel Hilo Motors are not in SyncRemoving and Replacing the Staff Control Assembly TROUBLESHOOTING/REPLACING Your APS Staff ControlElectrical Inspection of Control Box 6 months Recommended Maintenance and InspectionSERVICE/REPLACEMENT Part Record Double T-CABLE SERVICE/REPLACEMENT Part Diagram Electronics SERVICE/REPLACEMENT Part Diagram Decking SERVICE/REPLACEMENT Part Diagram Main Frame Capping Capping on Arms & Legs Zenith aps seRies GF121699RevA12

9000APS specifications

The Graham Field 9000APS is a remarkable piece of medical equipment designed specifically for healthcare facilities and home care environments. This innovative product showcases the company's commitment to quality, functionality, and user-centric design in assistive technology.

One of the standout features of the 9000APS is its advanced mobility solution, making it an ideal choice for patients with limited mobility or those recovering from surgery. The chair is equipped with a lightweight aluminum frame that contributes to its overall robustness while ensuring ease of transport and maneuverability. The strong yet manageable design supports a wide range of user needs, offering both stability and comfort.

The 9000APS features an ergonomic design that prioritizes the user's comfort. It is outfitted with contoured seating and soft padded armrests, which provide a supportive experience during prolonged use. The chair's adjustable height feature further enhances comfort and accessibility, allowing caregivers to tailor the chair to meet specific needs, especially when transferring patients from different surfaces.

Additionally, this model includes a dual-action braking system that enhances safety. The brakes can be easily engaged by the caregiver, preventing any unintentional movement while the patient is seated. Safety is also indicative in the chair’s non-slip feet, which ensure that it remains stable on various floor surfaces, further promoting user confidence.

In terms of technology, the Graham Field 9000APS emphasizes ease of use. Its compact and foldable design makes it simple to store and transport. The integrated storage compartments provide caregivers with quick access to personal items or essential medical supplies, streamlining the overall care process.

The chair is also designed with hygiene in mind. The materials used are easy to clean and maintain, which is crucial in preventing infections and ensuring a sanitary environment for patients. The fabric is not only durable but also resistant to moisture and stains, making it ideal for various healthcare settings.

Overall, the Graham Field 9000APS combines comfort, safety, and practicality, making it an exceptional choice for both patients and caregivers. Its innovative features and thoughtful design underscore Graham Field’s commitment to improving the quality of life for individuals requiring mobility assistance, ultimately making it a valuable addition to any healthcare routine.